Showing posts with label Transformers. Show all posts
Showing posts with label Transformers. Show all posts

Transformers MCQs - Quiz 5

Thursday, March 1, 2018

1. If the secondary of a 1 : 8 transformer is connected to the primary of a 1 : 5 transformer then the total transformation ratio will be ___.
A) 13
B) 5
C) 15
D) 40


2. A transformer having 100 turns in primary winding is given 200 V AC. In order to get 400 V AC at secondary winding the number of turns in secondary winding must be ___.
A) 100
B) 200
C) 300
D) 400


3. Which of the following transformers will be largest in size?
A) 10 kVA, 25 Hz
B) 10 kVA, 50 Hz
C) 10 kVA, 75 Hz
D) 10 kVA, 100 Hz


4. ___ is not a part of transformer.
A) Conservator
B) Breather
C) Exciter
D) Buchholz relay


5. Air Forced cooling is used for transformers up to a rating of ___.
A) 3000 kVA
B) 1500 kVA
C) 1000 kVA
D) 250 kVA


6. Transformer breaths in when load ___.
A) increases
B) decreases
C) remains constant
D) None of the above


7. The noise resulting from vibrations in a transformer is called ___.
A) humming
B) hysteresis
C) magnetization
D) buzzing


8. A distribution transformer has maximum efficiency at ___
A) Full load
B) No load
C) 50 % of full load
D) 80 % of full load


9. The resistance between primary and secondary in a transformer is ___
A) 10 ohms
B) 100 ohms
C) Infinity
D) Zero


10. Transformer oil must be free from ___
A) Gases
B) Moisture
C) Odour
D) Carbon

Read more...

Transformers MCQs - Quiz 4

Friday, February 23, 2018

1. For performing short circuit test which winding should be short circuited?
A) Low voltage
B) High voltage
C) Secondary
D) Primary


2. Losses occuring during short circuit test are considered ___ losses only because other losses are negligibly small.
A) Iron
B) Copper
C) Hysteresis
D) Eddy current


3. The problem of voltage rise/drop occuring due to increasing/decreasing voltage is handled with the help of ___.
A) Buchholz relay
B) Breather
C) Tap changer
D) None of above


4. Tap changers are used to adjust the ___ of transformer.
A) Temperature
B) Oil level
C) Turns ratio
D) All of above


5. If R is a resistance at secondary side of a transformer and k is transformation ratio, then the equivalent resistance R' as reffered to primary is ___.
A) R/(k2)
B) R/2k
C) 2R/k
D) R2/k


6. Buchholz relay is operared by ___.
A) Current
B) Voltage
C) Gas
D) None of above


7. ___ losses vary highly with load.
A) Copper
B) Iron
C) Hysteresis
D) Eddy current


8. Buchholz relay is used in ___ transformers.
A) Dry type
B) Oil cooled
C) Distribution
D) None of above


9. High frequency transformers use ___ cores.
A) Copper
B) Aluminum
C) Ferrite
D) None of above


10. Step up transformers increase ___
A) Current
B) Voltage
C) Power
D) Frequency

Read more...

Transformers MCQs - Quiz 3

Friday, February 2, 2018

1. Which of the following is a transformer cooling method?
A) ONAN
B) ONAF
C) OFAF
D) All of above


2. Which of the following is a cooling method for dry type transformers?
A) AN (Air Natural)
B) AF (Air Forced)
C) Both A & B
D) None of above


3. Which of the following cooling methods does not require use of energy?
A) OFAF
B) ONAF
C) ONAN
D) OFAN


4. ___ is used to capture any moisture or solid particles in oil.
A) Tank
B) Tap changer
C) Breather
D) Core


5. Buchholz is a type of ___.
A) Steel alloy
B) Relay
C) Tap changer
D) Transformer


6. Neutral of distribution transformer is earthed for ___
A) Safety
B) Balancing of voltages
C) Both A & B
D) None of above


7. Can two transformers be operated in parallel?
A) Yes
B) No


8. What conditions must be met for parallel operation of single phase transformers?
A) Transformation ratio should be same
B) Percentage voltage regulation should be same
C) Polarity should be same
D) All of above


9. What conditions must be met for parallel operation of three phase transformers?
A) Transformation ratio should be same
B) Phase sequence should be same
C) Percentage voltage regulation should be same
D) Phase notation should be same
E) All of above


10. How are the winding of distribution transformers normally connected?
A) Star-Star
B) Delta-Delta
C) Delta-Star
D) Star-Delta

Read more...

Transformers MCQs - Quiz 2

Thursday, February 1, 2018

1. ___ steel is used in core of a transformer.
A) Cold rolled
B) Hot rolled
C) Grain oriented
D) All of above


2. Efficiency of a transformer depends on ___
A) Load
B) Power factor
C) Both A & B
D) None of above


3. A power transformer is operating at max efficiency if copper losses ___ irons losses
A) Equal to
B) Greater than
C) Smaller than
D) None of above


4. ___ are due to reversal of magnetization in the transformer core.
A) Copper losses
B) Eddy current losses
C) Hysteresis losses
D) None of above


5. Auto-transformer consists of ___
A) One winding
B) Two windings
C) Three windings
D) No windings


6. Three winding transformer consists of ___ winding
A) Primary
B) Secondary
C) Tertiary
D) All of above


7. ___ is the measure of voltage drop from no load to full load.
A) Voltage increment
B) Voltage reduction
C) Loss control
D) Voltage regulation


8. % Voltage regulation = ___ x 100
A) (Vno-load-Vfull-load)/2Vfull-load
B) (Vno-load+Vfull-load)/Vfull-load
C) 2(Vno-load-Vfull-load)/Vfull-load
D) (Vno-load-Vfull-load)/Vfull-load


9. The value of voltage regulation at capacitive load is ___
A) Zero
B) Infinity
C) Positve
D) Negative


10. Function of oil in transformer tank is ___
A) Cooling
B) Insulation
C) Both A & B
D) None of Above

Read more...

Transformers MCQs - Quiz 1

Wednesday, January 31, 2018

1. ___ is a device which transforms energy from one circuit to another with a rise or fall in current/voltage.
A) Transformer
B) Motor
C) Generator
D) None of the above


2. Transformer transforms electrical power from primary to secondary winding through ___
A) Magnetic medium
B) Mechanical medium
C) Electrical medium


3. Transformer never changes ___ of alternating current
A) Current
B) Frequency
C) Voltage


4. Transformers are used for ___
A) Increasing or decreasing voltage/current
B) Impedance matching
C) Metering and protection
D) All of above


5. Transfomers work on idea of ___
A) Newton’s law
B) Gauss Theorem
C) Faraday’s law of electromagnetic induction
D) Both B & C


6. What happens when a transformer is operated at no load?
A) It draws a small current called no load current
B) Core is magnetized
C) Core is slightly heated due to losses
D) All of the above


7. Universal transformer equation is ___
A) V1/V2 = N1/N2
B) I1/I2 = N2/N1
C) Both A & B


8. Losses occurring in windings of a transformer are called ___
A) Copper losses
B) Eddy current losses
C) Hysteresis losses


9. Losses occurring in core of a transformer are called ___
A) Copper losses
B) Eddy current losses
C) Hysteresis losses
D) Both B & C


10. Core of a transformer is laminated to reduce ___
A) Copper losses
B) Eddy current losses
C) Hysteresis losses
D) None of above

Read more...

  © Blogger template On The Road by Ourblogtemplates.com 2009

Back to TOP